Categories
bikepacker bikepacking Freeload freeload bike rack Jeff's Bike kiwibrevet stealthbags stealthbikebags touraotearoa

Jeff’s Bike – Seat-bag vs rack, Kiwi designs


In 2016 a 3000km dirt brevet called Tour Aotearoa will be held for the length of our country, New
Zealand, and like many others I will be looking at what gear I will
take, and how I will carry it.

Luckily NZ
has been the testing ground for a fair bit of outdoor equipment, and we
even make a few items of our own. Two of these items will be the subject
of my review. The THULE  Pack n Pedal rack (previously known as the Freeload), and
the StealthBikeBags seat bag. These two items come from completely opposite ends
of the spectrum and as I have found offer very differing advantages and
disadvantages. While this review focuses on the pros and cons of these
particular items, you will find that a large percentage of the outcomes
can be applied to many other brands of seat bags and racks.

Freeload (THULE) rack with DIY bottle cage holders

The
THULE was designed and initially built by the Freeload guys in Dunedin
New Zealand and surfaced in time for the first 1100 kilometre Kiwi Brevet in 2010. I was one of the many riders using them in what was
essentially their first production test in the wild. The advantage of
this rack is that it can attach to the seat stays of a full suspension
bike, or a front fork: suspended or rigid. There are very few scenarios
it is not compatible with. It is generally used with a dry bag strapped
onto it, if you are using the sport model, but there is also a more
touring oriented deck that can be used with add-ons for pannier bags.
This review just looks at the sport model.

Seat-bag from Stealth Bike Bags in Eastbourne NZ

The Stealth seat-bag is the product of Michael Trudgen from Eastbourne
Wellington and is a typical seat-bag in the style of the Revelate Viscacha, Apidura saddle-pack or Porcelain Rocket Booster Rocket
Seat-Pack. It attaches via two Velcro straps around the seat-post and
via webbing belts with clasps through the saddle rails. It is
constructed from 600D Kodra plus with a plastic stiffener inside.

A Freeload Rack in use on the notorious Port Underwood in the inaugral Kiwi Brevet . Image Caleb Smith.
Comparing Stealth to Revelate for depth and length.

Water tightness

While
made of waterproofed materials the seams on the Stealth bag are not
sealed which is the case for most seat-bags. Some bags have a higher
inherent level of waterproofing than others, but generally you are
advised to use a dry-bag inside them for 100% water tightness. Obviously you need to use a dry-bag as well on the THULE.

Leg/butt clearance

THULE.
You are slightly more likely to find your legs kissing the front edge of your
dry-bag using the THULE than you are using the Stealth which has a very
narrow profile. Funnily enough, despite the height of the Stealth I did
not come into contact with it when hanging off the back of my saddle in
technical riding, whereas with the THULE I could feel the dry-bag
brushing against the inside of my thighs in this scenario. Despite this, I would not say
that this is an issue in any way. One is good, the other is better.

Ease of attachment

Comparatively
speaking, attaching the Stealth is pretty much a doddle, although I
found a technique which makes it even easier. If the bike is hanging
vertically from a hook (ok, this is only relevant for commuting and you
have a hook at your house) you can attach the seat-post velcros first, and then
loop the belts through the seat rails and crank up the clasps. If the
bike is horizontal you have to wrangle the weight of the Seat-pack as
you try to thread through the clasps and attach them. This is not an
issue if the seat bag is not packed at this time. It’s the packed
weight that makes it difficult. You can pack it while it is attached, or
pack it while is off the bike. 

A Freeload rack ready to build up.

The THULE Pack
n Pedal, well, I would have to say this is it’s Achilles heel and
possibly puts a lot of people off. The first time you assemble one of
these things, it might take you 30 to 50 mins, screwing all the bits
together. Actually there are only 6 screws but there is some threading of webbing too. This is a one-off operation though. Mounting it to the actual bike might take you
15 to 30 mins the first time. The ratcheting system is very very good,
and anyone that breaks one has to be incredibly ham-fisted (and very
strong) or turning it in the wrong direction with a hell of a lot of
force and a distinct lack of mechanical empathy.

Rack mounts left on for racing.

Ease of removal

Removing the Stealth is as simple as undoing two Velcros and two clasps.

Removing
the THULE is another story. Understand that you would only want to
remove your THULE at the end of a tour or to lend to a buddy, or to put
it on another bike. Most of the time I actually leave the black plastic
ratchet mounts on, and just remove from the stainless steel struts up. The THULE pack n
Pedal comes with a dinky little tool for deactivating the ratchet for
taking it off the bike. I don’t bother with the tool but instead use a small
flat headed screw driver. If you do lots of riding in pumicy, gritty
or sandy conditions the grit can get in the webbing and can make un-winding
it a tedious process. The screw-driver also comes in handy here for
picking out the webbing. This sounds like a fuss, and compared to a
“normal” rack, it is. But this is not a normal rack. You cannot mount
most normal racks to a full suspension bike or to a front fork. If you only ever intend to buy one rack, for all of your bikes, this is it.

Toting two racks on the Team RTD tandem.

Ease of packing

The
Stealth is a pretty normal seat bag in most respects and packs that
way. It is useful to pack the lower wedge of the bag with something
quite compressible which helps give the bag rigidity. The opening to the
Stealth bag is a lot narrower than other similar bags on the market but
it makes up for it by being longer and skinnier with much better wheel
clearance. You have to make the decision on your packing approach. To try to jam a pre-packed dry-bag into the seat-bag, or to put the dry-bag into the seat-bag and pack from there. Probably best that way. An another approach might be to forget about the dry-bag and have an external rain cover. That is not a feature of the Stealth bag at this point. Packing the THULE is as simple as strapping your dry-bag onto the rack, but even there you need to take care. If you have pointy or hard items in your dry-bag you best have them well wrapped so that pressure from your straps does not wear a hole in your dry-bag. I have an old piece of camping mat zip-tied to the rack so that a full day of off road hammering does not rub a hole into the bag.

The amount of kit I used for testing. Sleeping kit plus tool kit, hat and wind breaker.

Ease of access

The
Stealth bag, like most seat bags has good quick “un-click and
roll-back” access in comparison to a dry-bag which is strapped to a rack.
It will always be a bit more hassle to un-cinch a dry bag on a rack and
then re-set it. The speed at which you can access your goods determines the nature of the goods within.

Compression

The
narrowness of the Stealth bag makes it easy to compress the contents
quite a bit before even calling on the compression straps. Compression
in the THULE scenario comes down fully to what kind of a dry-bag you use
and if it is one of the compressible kind. While weight is an issue in
Bikepacking so is bulk. You don’t really want a big fluffy mess hanging off the back of your bike.

Quality of construction

The
workmanship in the Stealth bag is impressive and the material appears
very robust. The proof of the pudding in the design of the THULE rack is
that it has remained unchanged since its launch in 2009. The chunky look to this rack may put a
few people off, and I often say “simple is always better” but I have to
say, the THULE/Freeload racks are bulletproof. I have actually sat on
mine in order to be more aero on a long downhill stretch and it felt rock solid.

The generation 2 Stealth bag with deeper cross-section. Still heaps of tire clearance but with one larger seat-post velcro instead of two.

Tail-wag

When
you first try a seat-bag there is a that little tail-wag thing that you
notice, and then don’t notice again too much, until A. You drop into a
sharp corner at speed, or B, you take the bag off and on your first ride you notice you don’t have to compensate for it. Its just something
that you adapt to very quickly and the Stealth bag feels pretty much the
same as the Revelate Viscacha. The THULE is different again. The
feeling is there, but its a more solid feel. No wag as such, but a
definite rear weight bias that takes a bit of compensation until you
don’t notice it anymore. It’s the same with the Stealth although the Stealth’s weight is higher, but not by as much as you might think. Check out the image with the rack and the bag on the bike at the same time. I think most people would agree that having the weight down lower is more desirable.

A front mounted THULE/Freeload.

Need for tweakage

Something
that you will likely experience is the “settling” of your “kit”.
Whether its a seat-bag or a dry-bag on a rack. Sometimes, depending on
the terrain you may need to stop and give the straps a tweak. In a seat
bag it will likely be the straps that go through the seat rails; in a
rack set-up it will just be the straps holding the dry-bag on the rack.
In the case of the THULE, I recommend installing your rack well in
advance of your trip and give it some good testing, maybe even
deliberately wet the webbing of the mounts. Check that there is
not another “click” available in the ratchet after some big rides and those mounts will not
move again until you go to take the rack off.

Suitability for very rough terrain

This
is a tricky one. Both these systems work exceptionally well on rough terrain with
pros and cons. When on a full suspension bike you need to check that
your seat bag has room when you bottom out on the rear. Too little room
and your bag will let out a loud “zub” as the rear wheel starts to rub a
hole in the bag’s bottom. In a similar but opposite scenario with the THULE, the
dry-bag may come into contact with the underside of your seat. Not a
real problem unless you have something brittle in there. On a hard tail,
with the THULE, there are no problems, with the Stealth you should have
no problems either. For some people the early model Stealth bag was prone to slippage with aggressive
riding on rough terrain. The new cammed clasps fix this and are a free upgrade if you send your bag back to Michael. The very narrow design of the Stealth bag gives it more wheel clearance than any other bag I have yet seen.

If you ride a small 29er you will want a decent amount of clearance for your wheel.

Complexity of construction

The
Stealth seat-bag looks very simple compared to the THULE Pack n Pedal.
The Stealth has a plastic stiffener inserted in its base to help with
rigidity. You need to be aware of this when packing this bag, as it is possible to push aside the velcro responsible for keeping the stiffener in place. If you know about it, it
shouldn’t happen. I believe later models have a tweak to stop this. I’ve
mentioned the complicated look of the THULE Pack n Pedal before, but I’ve
have never had a bolt unwind on any of mine since 2010, so while it does
look complex, the engineering behind it really does seem to stand up to
the job. Bear in mind that I am talking about the Sport version of this
rack as I have not had extensive experience with the Tour rack running
Panniers. See my first unboxing and installing of my rack here in 2010.

The newer version has one large
velcro for the seat-post attachment

Adapability

The
Stealth bag will fit on any bike with 100mm of exposed seat post available, due to
its narrow style of construction. This is a boon to people with short
legs. By comparison the Revelate bag requires 127mm of seatpost. So far I
have managed to fit the THULE Pack N Pedal on all of the bikes I have
ever tried to fit it on. It has 3 different sized steel struts with
sliding ends so it is very adjustable. Sometimes people stress
about disc cable/hose routes but I just push them to the side if they
are ever in the way.

Feel

The ride
feels a bit harsher on the really rough stuff with the THULE Rack on, as it
feels like the weight of the rack’s load is going directly to the
wheels. With the seat-bag option I feel like the load is a bit more
suspended and it feels a bit more smooth.

Weight

Stealth bag, 430 grams, not including dry bag.
I
always assumed that the THULE/Freeload racks must be heavy, and that is
why the Bikepacking crowd in the US hadn’t warmed to them so much, but a
recent look at the website for the OMM (Old man mountain) racks shows
this not to be the case. THULE tells us that the sport rack weighs in at
760 grams. So far I have not been able to weigh any of mine accurately
to confirm this.The lightest of the OMM racks is 750grams with the
others coming in at 900 or 1000 grams. An important thing that I have just realised is that although the Pack n Pedal is relatively light, it will not let you run panniers in that mode, unlike a normal rack. You would have to install the special side-racks to the touring model version, which would add another 430 grams I believe.

Kiwi Brevet 2014 set-up. Set and forget.

Accessorising

The fat alloy tubes used in the THULE Pack n Pedal are very useful and well angled for attaching stretchy mount rear lights and
also water bottle cages attach easily with a couple of radiator
hose-clips, presuming you are not concerned with more rearward weight on
you bike. The Stealth bag has provision for maybe a rain jacket or banana
under its crossed elasticated straps on the top of the bag.


Commuting

I found both systems great for commuting, the only issues are covered above in ease of attachment, assuming you unclip the Stealth bag, or unstrap your dry bag using the THULE option.

At the bottom of Serendipity after a balls-out loaded run.

Testing environment

For
the THULE Pack n Pedal (Freeload) I have to declare I have used this
system three times in New Zealand’s 1100 kilometre Kiwi Brevet. Twice on
a 26er fully, and once on a drop-barred rigid 29er. I also subjected it
to my new local “accelerated bike-bag test course” which is a route I
often take on the way to work. It’s is a 3.1 km winding downhill course
with many tight turns, some roots, a drop and some G-outs, depending
on how fast you are going. I went as fast as I could, on each run, on a half-loaded
bike. The course takes in the Transient and Serendipity Trails in the
Polhil Aro Valley area. I did many runs on my rigid drop-barred Karate
Monkey with both systems. Apart from 2 weeks of 20kms each way
commuting, and a couple of long gravel grinds this was the extent of the testing I did on the Stealth bag which I borrowed off a friend who had just finished this years Kiwi Brevet with it. If Strava can be trusted, and I don’t believe it can, the difference between both systems was about 15 seconds over around 12 minutes. Not a margin large enough to say if it was real in my view. If I was just tootling up and down the River Trails I would not have learned much at all about these systems. Anything will work in that environment.

Four Freeloads at Murchison, Kiwi Brevet

Plus+ sizingThere is a big movement into “plus” sized tires. It started with the Surly Knard, a 3 inch wide tire 29er tire for their Krampus and ECR models and has now moved into 27.5 plus and 26 plus formats. These are tires from 3 inches wide upwards. Not forgetting the original plus format; FAT, which I think starts around 4 inches. Obviously these tires will not work with the THULE rack due to their width. Thanks Michael for reminding me of these formats : )

Bottom line
Both
of these set-ups do the same thing, but are coming from completely
different angles. The organised bikepacking I’ve done in NZ always has some
fairly rugged stretches in it. You don’t want to find yourself coming up short with
broken kit. Both of these Kiwi designed systems will do the job very
well, whether you are commuting to work or going all-out into the boonies. They are also systems that have a very high level of compatibility. By this I mean they will fit on 93% of bikes out there. The THULE because of its adjustability and the Stealth bag because of the narrow cross-section which gives superior wheel clearance for shorter riders.

– – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – – –
Disclaimer
This kit was collected by various means. Initially I borrowed a Stealth bag from a recent Kiwi Brevet rider, and then spoke to Michael himself at Stealthbikebags. He loaned me two bags for further evaluation. I also borrowed a Revelate bag from another rider for comparison and used my own Freeload racks for the other part of the testing. I also tested some pannier bags from Stealth bags as well in conjunction with the THULE touring deck and sides. I was very impressed with the way these worked but that’s another story. Michael can custom build pretty much anything you need and is always keen on feedback so he can develop his designs further, quicker.

Links
THULE
Stealth Bike Bags
Kiwi Brevet
Tour Aotearoa



Source link

Categories
Freeload freeload rack Hutt Valley Jeff's Bike Rimutaka Incline tandem

Jeff’s Bike – Jeff’s Bike Blog: Tandem newbie Inclinations


I’d only ever ridden a tandem twice before. The second time was with my wife on the back, and it mentally scarred her so much it just reinforced her fear of bicycles. Many years were to pass before she was to step over a top-tube again. The next time she rode it was as a result of the Bikewise ride to work month. All of a sudden she was commuting the 20kms into Wellington and back, and even joined the Voodoo Lounge team one year when we went over and did the 100km Grape Ride in Marlborough. She even did a Frocks on Bikes ride. That was probably the last time we had a summer in Wellington, so since then riding has not been high on her agenda.

I was starting to pine for the outdoors in the wake of the Kiwi Brevet and suggested that we load up the Jville Cycles Tandem and head for a short  over-nighter somewhere close to home. Finding somewhere was a lot harder than we thought, so we ended up just taking the Hutt Valley River trails and riding from Lower Hutt to the top of the Rimutaka Incline and camping out there.

The little Trangia stove

Tandems are a bit of hard work. (I now have massive respect for the people that used them in the Kiwi Brevet). They are so bloody heavy and getting them around the many stiles we encountered on the Hutt River Cycle way was a real team effort, a kind of two stage process whereby both of you loft the front wheel up in the air, and grab the second set of handlebars and steer it on the rear wheel. In fact the Rimutaka Incline itself was a doddle compared to the Hutt River Cycle way with all its little hurdles; all to keep bogans on motorbikes and 4wds out I guess. What really impressed me was that except for a few hundred metres you can get all the way to Te  Marua on the River Trail. So much work has been done on these trails over the years. Credit needs to go to someone.

I noticed the rear cog on the tandem was very hooked, and had to wonder if it was not just my imagination that someone was pedalling backwards at times! Getting a sore butt seemed to be the major problem for Kay so many short stops were called for. I think the fact that you really need to be still on a tandem so as not to cause balance issues is partly to blame, as the seat was comfy, and also sported a suspension seat post. Obviously a lack of ride time for my stoker was the main issue, but by the time we finished our ride there was less protestations on the downhills and I got far less arm-pump from over braking than I did on day one.

On the way back

I installed my two Freeload racks on either end of the bike, and my handlebar harness was made from an old Webstock Conference satchel. Other than that we had small back-packs on with a few little bits and pieces.

We borrowed my daughter’s tent and managed to repack it into a smaller package for stowing. Other items we took were two sleeping bags and mats and a small cooking kit with my little Trangia stove which I brought for the Kiwi Brevet but had not yet been used. One dehydrated meal for tea, a couple of porridge sachets and some Milo and we were set.

More suspension than we could handle!

It was a nice warmish night in our little tent, although I gave my air mattress to Kay and I put up with the crappy closed foam one which is a poor substitute even on the smooth ground. Overall it was a big success with only the sore botty detracting from it. We will have to work on that ! With a few more miles in the legs for Kay it would have been a far more enjoyable experience.

If anyone is interested in hiring the Jville Cycles Tandem then get in touch with its minder, Peter Colvin who is building up a fleet of hire bikes and currently has 3 tandems. Peter and his lady have toured overseas so he knows a thing or two about setting one up. By the way this one seemed to have about 6 inches of travel on the front so it was a bit wasted on us! 
Contact for Pete:
021 480 775



Source link

Categories
Freeload Jeff's Bike

Jeff’s Bike – Phone test – freeload bottle mounts




Source link

Categories
Freeload freeload bike rack Jeff's Bike Kiwi Brevet

Jeff’s Bike – Jeff’s Bike Blog: Nice rack !


I am a bit of a Freeload rack fan-boy. (Previous post). I used one on the inaugural Kiwi Brevet and have found nothing bad to say about them since then. One
of the big advantages of the Freeload is that it will fit on almost
anything, one rack fits all, rigid or suspended, front or rear.

One day I noticed that there was actually a heap of clearance between
the wheel and the rack on my 26 inch bike – the same rack also fits a
29er. Tim, one of the designers said, yes it was made one size for all. I
thought that maybe if I “chopped” my rack, I could get even more
clearance between my kit and the back of my seat under full suspension
compression. Tim reckoned it might work and sent me a couple of frames
to hack up.  See the results below. It worked brilliantly for my
application, but mileage may vary given frame/swing-arm angles etc.

Chopped rack at top, original rack at the bottom.

I have also had a new tour deck, but have not yet had the chance to
use it. I lent it to my work mate Andrew (one of 4 of us at work doing the Kiwi Brevet)
and he installed it yesterday with some very serious looking panniers
on it ! It feels rock solid. I reckon one pannier would do, they are massive.



Source link

Categories
Fastest Karate Monkey Freeload Jeff's Bike Kiwi Brevet Rig Surly

Jeff’s Bike – Karate Monkey Landspeed Record attempt


In my bid to build the fastest Karate Monkey on the planet I have a way to go. My second attempt at wind tunnel testing on the Rimutaka incline proved problematic as a southerly came through. I was in danger of getting hypothermia in the actual tunnel as the wind tried to wrestle the 2nd rain jacket I was trying to put on from my grip.

It’s at this time of the year (spring) that the weather is always at its worst. Winter is a doddle in Wellington. It’s always mild and mostly dry and most of the time you don’t even have to wear gloves. Ok, it snowed this year. But that has never happened before. Spring sucks. I am getting probably 1 dry ride out of 3, and the trails are a mess.

The first speed enhancement I tried was my home brewed aero-bars, followed by a reverse slammed riser stem, the Freeload rack speed-pod, then the Wheelbuilder.com wheel covers (disc wheel emulator). A 46 tooth big ring helps too.

Room for an expresso pot, tools and spare shorts. 

Wind tunnel testing is all very well, but its on the race track where you see if all the hours of computer modelling you have been doing pays off. Unfortunately the disc cover caused a slight rubbing on the brake caliper, so I had to eliminate it from the test. I could have run my tri-spoke on the front, but that would have meant putting the v-brakes back on. Too hard.

The race was on what the UK Time Trial testers would call a “sportsmans” course, a winding 22kms in the country with lots of the nasty coarse 3/4 chip that we specialise in here in NZ. You can tell it was slow when the fastest time was a  41kmh on a hi-end TT rig. We got hammered with a rain squall coming through as well.

The best I could manage was 35kmh in 37.25 mins. Pretty pathetic, but with 32 spokes smashing into the wind, Armadillo tires and very wide handlebars I guess I shouldn’t have expected too much. I did sit on 54kmh for a bit on the wednesday worlds ride early that week, but then I also went out the back some time shortly afterwards : )

The fat tires are back on now. But if anyone else wants to have a crack, we can start with the Karate Monkey World Landspeed record at 35kmh for 20 kms. All results must be verified.



Source link

Categories
Freeload Jeff's Bike Kiwi Brevet

Jeff’s Bike – Only 134 sleeps til the Kiwi Brevet !


I knew I was really looking forward to 2012’s Kiwi Brevet when I was daydreaming about the new course and I nearly rode into the back of a parked car. I also had this strange dream where I was riding my bike flanked by a group of Pukekos. Birds are very portentous to me. Native birds anyway. Maybe it was a combination of Brevet memories of all the Wekas we came across near Moana, and the time we were riding with a baby deer. The mind does strange things. I have done a lot of very cool things over the years on my bike, but so far the Kiwi Brevet tops them all. A special combination of adventure, camaraderie and challenge.

Last time I was very green, and apart from doing Outward Bound in 1984 I didn’t have much outdoor experience. My aim was to able to cope with anything that nature threw at me. I wasn’t interested in buying into the “accommodation anxiety” thing, riding on into the small hours to try and make it to pre-booked accommodation. I felt the need to be prepared. If you break a freewheel in the middle of the bush your credit card wont save you, so I took a bivvy sack and a sleeping bag.  As it happened we did experience a breakdown of sorts with my buddy coming down with heat-stroke and an enforced camp 3/4s of the way up the Mangatapu on day 1. Its not like he wasn’t fit. We had done a fair bit of training together and I was worried about keeping up with him to be honest. Anyway, we had the gear for a comfy night out so we were sweet. It was the most memorable night of the ride for me too. Camped out on Murders rock, with an amazing night sky..

In the end we were all very lucky, with good weather the whole time and what seemed like a perpetual tailwind. That doesn’t mean to say it will be the same this time around. New Zealand’s weather can be very changeable.

This time I am looking at different bike options. Last time I adopted a pretty simple approach. I brought a Freeload rack and bolted it onto my Santa Cruz full suspension bike (my installation pix here). Freeload built the first, and to my knowledge only rack that will bolt on to almost any fully (or suspension fork). If you have a fully the only other option is one of these overgrown seat bags. Having never used a seat bag I cant comment on how they work. I guess the weight is up a little higher. Freeload also do a pannier specific rack now, which I have but have yet to test.

I ended up riding with two other guys with Freeload racks. Jonty had them on both ends and Nick had one with panniers on the back. While they would have have been very envious of my fully as we rode through the Molesworth corrugations, I was very envious of the ease of access that Nick had to gear in his saddlebags. There was no messing about with un-strapping a dry bag which you probably just spent 15 minutes cinching up so it wouldn’t wobble off after a couple of hours on a gnarly track. A couple of small side panniers like Nicks were brilliant.

Outside the Black Ball Hilton.

Now that I have a rigid 29er Surly Karate Monkey I am wondering if I should use that. Its going to be at least 2 pounds heavier than the Santa Cruz which weighed in at 28.5 pounds with aero-bars and rear rack (no load). The 29er wheels roll beautifully and I am not yet convinced the weight would make a lot of difference.

It didn’t seem to be a problem for the Aussie Brovet guys who came over with their fully loaded Salsa Fargos.  There is a hell of a lot of climbing in the Kiwi Brevet, but it is spread out over 1100kms. Its got to be pretty damn steep for a heavier bike to make a big difference. There will be a few very steep segments this time around, probably more than there was last time, but if it comes down to it, if you get out of bed 30 minutes earlier the next day, any disadvantage from having a heavier bike would be gone (I think). This implies a degree of competitiveness, which we weren’t actually buying into in 2010.  I am pretty sure I wont be buying into it again in 2012 ! The Karate Monkey is also a very simple bike, cable discs which are so set and forget, compared to my finicky hydraulics, and friction bar-end shifters. No pivots or shocks to break. Who am I trying to convince?

Cleetus in Port Underwood. It was hot.

Riding a fully in 2010 made it fun for me. I am wondering if that’s what kept me fresh and enabled us to bang out the last 200 plus kms from Hanmer in under 11 hours. How tired would I be if I rode a steel rigid bike the whole way. That is the big question. Am I stuck on the big-wheeled band-wagon? I guess I need to do a few long rides. Some with CX tires, some with full sized tires. The CX tires fairly scream along on the flat stuff, but in lieu of suspension, a fatter tire is the only suspension you will be getting on a rigid frame.

More questions, a camera or not? I took some good photos last time, many of them good enough to be used in magazines, and I also used my little phone to take some passable photos for blogging. What’s the use of doing such a cool event if you don’t take the time to snap a few quality shots to document it and skite about what a fun time you are having while you are doing it! There is a lot of weight in there if you also take a phone charger, plus one for your lights. The new Ayup light’s batteries come with a low-power light setting so that could greatly extend battery life.

The next thing I am geeking out on is a bivvy sack versus a tarp. A tarp could be a bit smaller and breathe a lot better. I only used my bivvy sack twice last time and I found it a bit sweaty. Here is a very cool set-up. Charlotte used one like this in 2010. Check out this website pimping the pros of “quilts“. It actually makes a lot of sense.I am also keen to use aero bars again, they are a great place to hang some light gear off and you really appreciate having another position for your hands, and the ability to stretch out and take some more weight off your butt. I made sure I was well used to my aeros before the last Brevet and even did a lap of the Coppermine circuit when in Nelson with them on. Right now I am messing with some home-grown minimalist aeros in my shed. Never throw anything out : )

So that’s were I am at at the moment.Thinking about the Kiwi Brevet on February 4th 2012.
Only 134 sleeps !



Source link